57BYGH5602 NEMA 23 Stepper Motor | 57BYGH230-C-22GH

57BYGH5602 NEMA 23 Stepper Motor | 57BYGH230-C-22GH

57BYGH5602 two-phase hybrid stepper motor
Factory model: 57BYGH230-C-22GH
1.8° step angle; 3.5 A/phase; 1.2 N·m (minimum) holding torque
57.2 mm frame; 56 mm body; Ø8 mm d-cut shaft; 22 mm shaft extension
Flying leads; 430 mm; Bare wire ends
Shaft machining, lead wires and connectors can be configured to your application.
Select the motor according to the load, operating speed and drive configuration.

Quantity:
Availability:





Inquire Add to Basket

Model:
57BYGH5602
Brand:
Shengyang Motor
Code:
57BYGH230-C-22GH

Product Specifications

Motor model: 57BYGH5602

Factory model: 57BYGH230-C-22GH

Frame size: 57.2mm

Body length: 56mm

Shaft diameter: Ø8mm

Shaft extension: 22mm

Shaft type: D-cut shaft

Mounting hole spacing: 47.14mm

Mounting holes: 4-Ø5

Cable type: Flying leads

Cable length: 430mm

Equipment end: Bare wire ends

Electrical Parameters

Phases: 2

Step angle: 1.8°

Rated current: 3.5A/phase

Rated winding voltage: DC 2.27V

Phase resistance: 0.65Ω

Phase inductance: 2.2mH

Holding torque: ≥1200 mN·m

Driver supply voltage: DC 12–36V

The rated winding voltage is different from the driver supply voltage.

Customization

Shaft machining, lead wire length and connectors can be customized. Confirm the required configuration before ordering.

Technical Drawing

Outline drawing: 57BYGH230-C-22GH. Nominal values are shown. Refer to the corresponding original drawing for dimensional and electrical tolerances and complete technical requirements.