42BYGH6003 NEMA 17 Hybrid Stepper Motor

42BYGH6003 two-phase hybrid stepper motor
Factory model: 42BYGH4205-N-24DH
1.8° step angle; 2.5 A/phase; 0.8 N·m (typical) holding torque
42.2 mm frame; 60 mm body; Ø5 mm d-cut shaft; 24 mm shaft extension
Flying leads; 300 mm; Bare wire ends
Shaft machining, lead wires and connectors can be configured to your application.
Select the motor according to the load, operating speed and drive configuration.

Quantity:
Availability:





Inquire Add to Basket

Model:
42BYGH6003
Brand:
Shengyang Motor
Code:
42BYGH4205-N-24DH

Product Specifications

Motor model: 42BYGH6003

Factory model: 42BYGH4205-N-24DH

Frame size: 42.2mm

Body length: 60mm

Shaft diameter: Ø5mm

Shaft extension: 24mm

Shaft type: D-cut shaft

Mounting hole spacing: 31mm

Mounting holes: 4-M3

Cable type: Flying leads

Cable length: 300mm

Equipment end: Bare wire ends

Weight: 0.47kg (reference value)

Electrical Parameters

Phases: 2

Step angle: 1.8°

Rated current: 2.5A/phase

Rated winding voltage: DC 2.5V

Phase resistance: 1Ω

Phase inductance: 2.1mH

Holding torque: 0.8 N·m TYP, both phases energized

Driver supply voltage: DC 12–24V

The rated winding voltage is different from the driver supply voltage.

Customization

Shaft machining, lead wire length and connectors can be customized. Confirm the required configuration before ordering.

Technical Drawing

Outline drawing: 42BYGH4205-N-24DH. Nominal values are shown. Refer to the corresponding original drawing for dimensional and electrical tolerances and complete technical requirements.