35BYGF4001 NEMA 14 Hybrid Stepper Motor

35BYGF4001 two-phase hybrid stepper motor
Factory model: 35BYGF2702-A-20DN
1.8° step angle; 0.8 A/phase; 0.255 N·m (minimum) holding torque
35.3 mm frame; 40 mm body; Ø5 mm d-cut shaft; 20 mm shaft extension
Plug-in cable; 200 mm; XH2.5 4-pin connector
Shaft machining, lead wires and connectors can be configured to your application.
Select the motor according to the load, operating speed and drive configuration.

Quantity:
Availability:





Inquire Add to Basket

Model:
35BYGF4001
Brand:
Shengyang Motor
Code:
35BYGF2702-A-20DN

Product Specifications

Motor model: 35BYGF4001

Factory model: 35BYGF2702-A-20DN

Frame size: 35.3mm

Body length: 40mm

Shaft diameter: Ø5mm

Shaft extension: 20mm

Shaft type: D-cut shaft

Mounting hole spacing: 26mm

Mounting holes: 4-M3

Cable type: Plug-in cable assembly

Cable length: 200mm

Equipment end: XH2.5 4pin

Electrical Parameters

Phases: 2

Step angle: 1.8°

Rated current: 0.8A/phase

Rated winding voltage: DC 7.6V

Phase resistance: 9.5Ω

Phase inductance: 13.5mH

Holding torque: ≥255 mN·m

Driver supply voltage: DC 12–24V

The rated winding voltage is different from the driver supply voltage.

Customization

Shaft machining, lead wire length and connectors can be customized. Confirm the required configuration before ordering.

Technical Drawing

Outline drawing: 35BYGF2702-A-20DN. Nominal values are shown. Refer to the corresponding original drawing for dimensional and electrical tolerances and complete technical requirements.