35BYGF2801 NEMA 14 Hybrid Stepper Motor

35BYGF2801 two-phase hybrid stepper motor
Factory model: 35BYGF1505-A-25DH
1.8° step angle; 0.8 A/phase; 0.15 N·m (minimum) holding torque
35.3 mm frame; 28 mm body; Ø5 mm d-cut shaft; 25 mm shaft extension
Plug-in cable; 200 mm; XH2.5 4-pin connector
Shaft machining, lead wires and connectors can be configured to your application.
Select the motor according to the load, operating speed and drive configuration.

Quantity:
Availability:





Inquire Add to Basket

Model:
35BYGF2801
Brand:
Shengyang Motor
Code:
35BYGF1505-A-25DH

Product Specifications

Motor model: 35BYGF2801

Factory model: 35BYGF1505-A-25DH

Frame size: 35.3mm

Body length: 28mm (reference value)

Shaft diameter: Ø5mm

Shaft extension: 25±1 mm

Shaft type: D-cut shaft

Mounting hole spacing: 26mm

Mounting holes: 4-M3

Cable length: 200mm (supplied cable)

Connection type: Plug-in

Motor-end connector: ZH-11AW

Equipment end: XH2.5 4pin

Electrical Parameters

Phases: 2

Step angle: 1.8°

Rated current: 0.8A/phase

Rated winding voltage: DC 3.84V

Phase resistance: 4.8Ω

Phase inductance: 5.1mH

Holding torque: ≥150 mN·m

Driver supply voltage: DC 12–24V

The rated winding voltage is different from the driver supply voltage.

Customization

Shaft machining, lead wire length and connectors can be customized. Confirm the required configuration before ordering.

Technical Drawing

Outline drawing: 35BYGF1505-A-25DH. Nominal values are shown. Refer to the corresponding original drawing for dimensional and electrical tolerances and complete technical requirements.