57BYGH5601 NEMA 23 Hybrid Stepper Motor

Product Specifications

Motor model: 57BYGH5601

Factory model: 57BYGH225-2N-21DH

Frame size: 57.2mm

Body length: 56mm

Shaft diameter: Ø6.35mm

Shaft extension: 21mm

Shaft type: D-cut shaft

Mounting hole spacing: 47.14mm

Mounting holes: 4-Ø5

Cable type: Flying leads

Cable length: 500mm

Equipment end: Bare wire ends

Electrical Parameters

Phases: 2

Step angle: 1.8°

Rated current: 2.8A/phase

Rated winding voltage: DC 2.52V

Phase resistance: 0.9Ω

Phase inductance: 2.5mH

Holding torque: ≥1.0 N·m

Driver supply voltage: DC 12–36V

The rated winding voltage is different from the driver supply voltage.

Customization

Shaft machining, lead wire length and connectors can be customized. Confirm the required configuration before ordering.

Technical Drawing

Outline drawing: 57BYGH225-2N-21DH. Nominal values are shown. Refer to the corresponding original drawing for dimensional and electrical tolerances and complete technical requirements.

{"json":"[{\"photoId\":\"501213398\",\"photoType\":\"pdf\",\"photoSize\":\"125\",\"name\":\"57BYGH225-2N-21DH-外形图.pdf\",\"fileId\":\"34877798\",\"encodeFileId\":\"MepUNtImRHJd\",\"photoUrlNormal\":\"//inrorwxhnkpilq5p-static.micyjz.com/static/assets/widget/images/downloadNew/pdf.svg\"}]","type":"1"}