Product Specifications
Motor model: 42BYGH6001
Factory model: 42BYGH4208-N-24DHT
Frame size: 42.3mm
Body length: 60mm
Shaft diameter: Ø5mm
Shaft extension: 24mm
Shaft type: D-cut shaft
Mounting hole spacing: 31mm
Mounting holes: 4-M3
Cable type: Flying leads
Cable length: 500mm
Equipment end: Bare wire ends
Weight: 0.47kg (reference value)
Electrical Parameters
Phases: 2
Step angle: 1.8°
Rated current: 2.1A/phase
Rated winding voltage: DC 3.57V
Phase resistance: 1.7Ω
Phase inductance: 3.1mH
Holding torque: ≥600 mN·m, both phases energized
Driver supply voltage: DC 12–24V
The rated winding voltage is different from the driver supply voltage.
Customization
Shaft machining, lead wire length and connectors can be customized. Confirm the required configuration before ordering.
Technical Drawing
Outline drawing: 42BYGH4208-N-24DHT. Nominal values are shown. Refer to the corresponding original drawing for dimensional and electrical tolerances and complete technical requirements.